Control-It Instructions:

USING NEO-TACK PRODUCTS ON SPINNER

Control-It can be used on polished and dull equipment. It creates additional 4 to 8 ft. in length and an even arc in the backend. After applying several coats of Control-It oil will not penetrate the surface and the track area will last several games.

POLISHED EQUIPMENT:

•  Clean and polish the ball first with Renew-It for about 45 seconds on each
   side.

•  After this is done, apply a liberal amount of Control-It on a terry cloth
   towel.

•  Apply on both sides for about 30 seconds or more. This will give you about
   4 to 5 feet in length.

•  FOR ADDITIONAL LENGTH - Wait a couple of hours and apply second coat by
   hand.

DULL EQUIPMENT:

•  Apply Control-It by hand.

NOTE: This product does not need a spinner to produce the above effect.

REMOVAL: Control-It can only be removed by sanding.